0
Home / System solutions - DIY / DECOR Egeo

System solution

DECOR Egeo

Slightly relief appearance

icon
Suitable for
use in interior spaces, where we want to create the appearance of a fine surface with a slight relief.
System description
The EGEO technique helps us create the appearance of a fine surface, with a slightly gentle relief, which gives the surface a more pronounced pattern under a certain angle of observation or incidence of light. The barely visible pattern structure seems discrete yet very noble like the Egeo natural marble. When applying the ordinary EGEO technique, use one shade of DECOR Marmorin, while the more demanding application consists of several different shades of DECOR Marmorin, which together form the final aesthetical appearance.
Recommended shades of technique
1280x720px_2_0000s_0000s_0000_Egeo_Marmorin-730B-Joy-100.png
DECOR Marmorin 730B
1280x720px_2_0000s_0000s_0001_Egeo_Marmorin-600B-Vitality-10.png
DECOR Marmorin 600B
1280x720px_2_0000s_0000s_0002_Egeo_Marmorin-540C-Freedom-135.png
DECOR Marmorin 540C
1280x720px_2_0000s_0000s_0003_Egeo_Marmorin-470B-Wisdom-100.png
DECOR Marmorin 470B
1280x720px_2_0000s_0000s_0004_Egeo_Marmorin-070A-Family-35.png
DECOR Marmorin 070A
1280x720px_2_0000s_0000s_0005_Egeo_Marmorin-030A-Success-65.png
DECOR Marmorin 030A
System composition
JUBOLIN P 50 extra fine 0-3 ACRYL Emulsion DECOR Marmorin DECOR Wax
Technique instructions

Surface Preparation:

  1. The surface must be dry, firm, and free from stains, oils, and similar impurities.
  2. Smooth the surfaces with DECOR Smooth Relief or JUBOLIN P15 to a total thickness of 3 mm. After the layer has dried, sand it down and remove the dust.
  3. Apply an ACRYL Emulsion, diluted with water in a 1:1 ratio, onto the dried layer of DECOR Smooth Relief or JUBOLIN P15.

Application Process:

  1. Using a trowel, apply DECOR Marmorin in a very thin layer (approximately 0.1–0.5 mm) over an area of 0.5–1 m².
  2. Apply a second layer of DECOR Marmorin in the same way, polishing it to a high shine.
  3. Apply a thin layer (0.5 mm) of DECOR Marmorin onto the trowel, gently lay the trowel flat on the surface, and, using circular motions, lightly transfer the material onto the dried previous layer.
  4. Once the surface is completely dry, gently remove any peaks with a stainless steel trowel. This can also be done with fine sandpaper (grain size 200–300).
  5. After complete drying, or after 24 hours, begin applying DECOR Wax. Apply with a stainless steel trowel in as thin a layer as possible. After 3 hours, repeat the procedure.
  6. When the final layer of DECOR Wax is completely dry (approximately 24 hours), begin polishing. Polishing can be done manually or mechanically. For machine polishing, use a lambswool polishing tool. Start polishing at low speed; as the surface begins to gain gloss, slightly increase the speed. For manual polishing, use a dedicated decorative trowel and, with even movements and slightly stronger pressure on the surface, go over the entire surface.
Tools
  • Roller
  • Stainless spatula
  • Stainless rounded trowel
Advantages and beneits for investitors
  • A wide selection of exclusive shades
  • Attractive and modern appearance
  • Expressing individuality/creativity